Flight puncher: The Windson PUNCHER is used to attach the flights more firmly to the shaft. If you find that the flights are falling out of ...
Description
Windson PUNCHER
Flight puncher: The Windson PUNCHER is used to attach the flights more firmly to the shaft. If you find that the flights are falling out of the shafts, there is nothing easier than getting a punch and tightening the flights into the shaft.
The principle is simple
1. a round hole is punched in the flight
2. a metal ring is inserted into the hole, which is usually included with nylon shafts
3. The flight is inserted into the shaft and the metal ring is put on at the same time
4. after pushing the ring onto the shaft the flight will stay in place
dimensions: 6 x 5 x 2 cm
Specifications
Material
zinc, ABS
Product code
160145
Supplier code
WD-PUNCHER-WH
The colour of the product can slightly differ due to the lighting in the studio and the colour reproduction on your device.